User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Tektronix 2440 Sub7
DATE:                  30-Oct-97
AUTHOR:                User Contributed
REVISION:              06-5032
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       13
NUMBER OF LINES:       208
CONFIGURATION:         HP 3325B
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        W
  1.002  ASK+                                          X
  1.003  IEEE         [SRQ OFF]
  1.004  HEAD         {* CH2 Vertical Gain Test *}
# This jmp FSC is needed for Cancel and Repeat options during test run.
  1.005  JMP          2.001
  1.006  EVAL   Dummy
  2.001  HEAD         CH2 Vertical Gain Test
  2.002  DISP         Connect the Pulse Head to UUT CH2 input connector.
  2.003  IEEE         init panel
  2.003  IEEE         vmode ch1:off,ch2:on
  2.004  IEEE         CH2 volts:.002,pos:-3; atrigger cou:hfr; hor asec:500e-6
  2.004  IEEE         bwlimit twenty; cursor function:volts
# 2.005  5011         10mVP                        1kH            -D    S
  2.004  IEEE         [@3325] FU 2; AM 5 MV; FR 1 KH
  2.005  DISP         Using the CURSOR/DELAY control, align the selected
  2.005  DISP         cursor (segmented) with the top of the displayed
  2.005  DISP         waveform.
  2.006  IEEE         cursor sel:two
  2.007  DISP         Use the CURSOR/DELAY control again to align the cursor
  2.007  DISP         to the bottom of the waveform. Take care to use the same
  2.007  DISP         reference points (top edge, bottom edge, or center) of
  2.007  DISP         the waveform and cursor as in the previous step.
  2.008  IEEE         cursor? disp:val
  2.009  IEEE         [I]
  2.010  MATH         mem1 = 10.000
  2.011  MATH         mem = mem * 1000
  2.012  MEME
  2.013  MEMC   2     mVP            0.28U
# 3.001  5011         20mVP                        1kH            -D    S
  3.001  IEEE         [@3325] FU 2; AM 10 MV; FR 1 KH
  3.002  IEEE         CH2 volts:5e-3; cursor sel:one
  3.003  DISP         Using the CURSOR/DELAY control, align the selected
  3.003  DISP         cursor (segmented) with the top of the displayed
  3.003  DISP         waveform.
  3.004  IEEE         cursor sel:two
  3.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  3.005  DISP         to the bottom of the waveform. Take care to use the same
  3.005  DISP         reference points (top edge, bottom edge, or center) of
  3.005  DISP         the waveform and cursor as in the previous step.
  3.006  IEEE         cursor? disp:val
  3.007  IEEE         [I]
  3.008  MATH         mem1 = 20.00
  3.009  MATH         mem = mem * 1000
  3.010  MEME
  3.011  MEMC   5     mVP            0.6U
# 4.001  5011         50mVP                        1kH            -D    S
  4.001  IEEE         [@3325] FU 2; AM 25 MV; FR 1 KH
  4.002  IEEE         CH2 volts:10e-3; cursor sel:one
  4.003  DISP         Using the CURSOR/DELAY control, align the selected
  4.003  DISP         cursor (segmented) with the top of the displayed
  4.003  DISP         waveform.
  4.004  IEEE         cursor sel:two
  4.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  4.005  DISP         to the bottom of the waveform. Take care to use the same
  4.005  DISP         reference points (top edge, bottom edge, or center) of
  4.005  DISP         the waveform and cursor as in the previous step.
  4.006  IEEE         cursor? disp:val
  4.007  IEEE         [I]
  4.008  MATH         mem1 = 50.00
  4.009  MATH         mem = mem * 1000
  4.010  MEME
  4.011  MEMC   10    mVP            1.4U
# 5.001  5011         100mVP                       1kH            -D    S
  5.001  IEEE         [@3325] FU 2; AM 50 MV; FR 1 KH
  5.002  IEEE         CH2 volts:20e-3; cursor sel:one
  5.003  DISP         Using the CURSOR/DELAY control, align the selected
  5.003  DISP         cursor (segmented) with the top of the displayed
  5.003  DISP         waveform.
  5.004  IEEE         cursor sel:two
  5.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  5.005  DISP         to the bottom of the waveform. Take care to use the same
  5.005  DISP         reference points (top edge, bottom edge, or center) of
  5.005  DISP         the waveform and cursor as in the previous step.
  5.006  IEEE         cursor? disp:val
  5.007  IEEE         [I]
  5.008  MATH         mem1 = 100.00
  5.009  MATH         mem = mem * 1000
  5.010  MEME
  5.011  MEMC   20    mVP            2.8U
# 6.001  5011         200mVP                       1kH            -D    S
  6.001  IEEE         [@3325] FU 2; AM 100 MV; FR 1 KH
  6.002  IEEE         CH2 volts:50e-3; cursor sel:one
  6.003  DISP         Using the CURSOR/DELAY control, align the selected
  6.003  DISP         cursor (segmented) with the top of the displayed
  6.003  DISP         waveform.
  6.004  IEEE         cursor sel:two
  6.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  6.005  DISP         to the bottom of the waveform. Take care to use the same
  6.005  DISP         reference points (top edge, bottom edge, or center) of
  6.005  DISP         the waveform and cursor as in the previous step.
  6.006  IEEE         cursor? disp:val
  6.007  IEEE         [I]
  6.008  MATH         mem1 = 200.0
  6.009  MATH         mem = mem * 1000
  6.010  MEME
  6.011  MEMC   50    mVP            6U
# 7.001  5011         500mVP                       1kH            -D    S
  7.001  IEEE         [@3325] FU 2; AM 250 MV; FR 1 KH
  7.002  IEEE         CH2 volts:100e-3; cursor sel:one
  7.003  DISP         Using the CURSOR/DELAY control, align the selected
  7.003  DISP         cursor (segmented) with the top of the displayed
  7.003  DISP         waveform.
  7.004  IEEE         cursor sel:two
  7.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  7.005  DISP         to the bottom of the waveform. Take care to use the same
  7.005  DISP         reference points (top edge, bottom edge, or center) of
  7.005  DISP         the waveform and cursor as in the previous step.
  7.006  IEEE         cursor? disp:val
  7.007  IEEE         [I]
  7.008  MATH         mem1 = 500.0
  7.009  MATH         mem = mem * 1000
  7.010  MEME
  7.011  MEMC   100   mVP            14U
# 8.001  5011         1VP                          1kH            -D    S
  8.001  IEEE         [@3325] FU 2; AM 500 MV; FR 1 KH
  8.002  IEEE         CH2 volts:200e-3; cursor sel:one
  8.003  DISP         Using the CURSOR/DELAY control, align the selected
  8.003  DISP         cursor (segmented) with the top of the displayed
  8.003  DISP         waveform.
  8.004  IEEE         cursor sel:two
  8.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  8.005  DISP         to the bottom of the waveform. Take care to use the same
  8.005  DISP         reference points (top edge, bottom edge, or center) of
  8.005  DISP         the waveform and cursor as in the previous step.
  8.006  IEEE         cursor? disp:val
  8.007  IEEE         [I]
  8.008  MATH         mem1 = 1.000
  8.009  MEME
  8.010  MEMC   200   VP             0.03U
# 9.001  5011         2VP                          1kH            -D    S
  9.001  IEEE         [@3325] FU 2; AM 1 VO; FR 1 KH
  9.002  IEEE         CH2 volts:500e-3; cursor sel:one
  9.003  DISP         Using the CURSOR/DELAY control, align the selected
  9.003  DISP         cursor (segmented) with the top of the displayed
  9.003  DISP         waveform.
  9.004  IEEE         cursor sel:two
  9.005  DISP         Use the CURSOR/DELAY control again to align the cursor
  9.005  DISP         to the bottom of the waveform. Take care to use the same
  9.005  DISP         reference points (top edge, bottom edge, or center) of
  9.005  DISP         the waveform and cursor as in the previous step.
  9.006  IEEE         cursor? disp:val
  9.007  IEEE         [I]
  9.008  MATH         mem1 = 2.000
  9.009  MEME
  9.010  MEMC   500   VP             0.06U
#10.001  5011         5VP                          1kH            -D    S
 10.001  IEEE         [@3325] FU 2; AM 2.5 VO; FR 1 KH
 10.002  IEEE         CH2 volts:1; cursor sel:one
 10.003  DISP         Using the CURSOR/DELAY control, align the selected
 10.003  DISP         cursor (segmented) with the top of the displayed
 10.003  DISP         waveform.
 10.004  IEEE         cursor sel:two
 10.005  DISP         Use the CURSOR/DELAY control again to align the cursor
 10.005  DISP         to the bottom of the waveform. Take care to use the same
 10.005  DISP         reference points (top edge, bottom edge, or center) of
 10.005  DISP         the waveform and cursor as in the previous step.
 10.006  IEEE         cursor? disp:val
 10.007  IEEE         [I]
 10.008  MATH         mem1 = 5.000
 10.009  MEME
 10.010  MEMC   1     VP             0.14U
#11.001  5011         10VP                         1kH            -D    S
 11.001  IEEE         [@3325] FU 2; AM 5 VO; FR 1 KH
 11.002  IEEE         CH2 volts:2; cursor sel:one
 11.003  DISP         Using the CURSOR/DELAY control, align the selected
 11.003  DISP         cursor (segmented) with the top of the displayed
 11.003  DISP         waveform.
 11.004  IEEE         cursor sel:two
 11.005  DISP         Use the CURSOR/DELAY control again to align the cursor
 11.005  DISP         to the bottom of the waveform. Take care to use the same
 11.005  DISP         reference points (top edge, bottom edge, or center) of
 11.005  DISP         the waveform and cursor as in the previous step.
 11.006  IEEE         cursor? disp:val
 11.007  IEEE         [I]
 11.008  MATH         mem1 = 10.000
 11.009  MEME
 11.010  MEMC   2     VP             0.28U
#12.001  5011         20VP                         1kH            -D    S
 12.001  IEEE         [@3325] FU 2; AM 10 VO; FR 1 KH
 12.002  IEEE         CH2 volts:5; cursor sel:one
 12.003  DISP         Using the CURSOR/DELAY control, align the selected
 12.003  DISP         cursor (segmented) with the top of the displayed
 12.003  DISP         waveform.
 12.004  IEEE         cursor sel:two
 12.005  DISP         Use the CURSOR/DELAY control again to align the cursor
 12.005  DISP         to the bottom of the waveform. Take care to use the same
 12.005  DISP         reference points (top edge, bottom edge, or center) of
 12.005  DISP         the waveform and cursor as in the previous step.
 12.006  IEEE         cursor? disp:val
 12.007  IEEE         [I]
 12.008  MATH         mem1 = 20.00
 12.009  MEME
 12.010  MEMC   5     VP             0.6U
 13.001  IEEE         [@3325] AM .0005 VR
 13.002  END